MY24 - RR430 4T

Beta Motorcycles presents the new MY24 RR, a bike which carries over many of the characteristics that made its predecessor so unbeatable last season, but which has been revised with a number of significant new features introduced across the range, plus other upgrades specific to certain engine sizes, to maintain the supremacy of the RR family as a whole.

Beta worked in close collaboration with Enduro champions Brad Freeman and Steve Holcombe to develop a host of small improvements on both the powertrain and the frame/suspension for the MY 2024 RR 2 Stroke and 4 Stroke models, to consolidate the already highly acclaimed characteristics of the previous generation.

As always, the guiding philosophy of the engineers at Beta has been to not only increase the performance of the brand’s bikes, but to also make this performance even more accessible. So rather than major changes, this model year has gained a series of upgrades intended to consolidate all the outstanding qualities of each individual model.

Completing the picture are new graphics, which lend a zero-compromises racing look to the entire range.

As always, the range is made up of 8 different models, each with its own personality, to cater for the needs of a very diverse spectrum of riders. There’s the perfect RR for every rider, but what every model has in common is an ability to instill confidence in the user and offer a genuinely rewarding riding experience.

The MY24 RR 480 4T best expresses itself in wide open spaces. Its characteristics are similar to the 430 model but with even greater torque and power, suitable for more expert and physically fit riders.

The updates introduced for the MY 2024 RR range are summed up below:

– Traction control: the traction control has taken a major step forward in its development. The dedicated mappings have indeed been improved by Betamotor technicians, who have identified a new, more precise method of intervention of the traction control system in order to be as precise as possible in its operation and unsure unnecessary or overly invasive intervention is prevented.

– Airbox: the airbox sleeve has had its geometry overhauled, and with it the airflow to the engine, to offer greater performance at medium-high engine speeds, while maintaining the torque at low speeds which was obtained with the introduction of the current exhaust manifold. This innovation now allows for full-blooded power delivery along the entire curve.

– Seat: the foam making up the seat has a different geometry and density to provide greater rider comfort. The greater support area and different composition of the materials now provide the rider with a much more comfortable point of contact with the bike.

– Suspension: in addition to the continuous refinement of the suspension setup, the Model Year 24 bikes feature lighter fork sheaths, particularly in the area of engagement of the fork rods. The different machining of the sheath is designed to provide controlled flexibility, with the result of smoother damping of rough terrain and therefore significantly improved comfort and sensitivity.

– Brakes: the front braking system has received upgrades to the brake line. The line’s protective sheath is now fastened better with dual crimping (at the top and bottom, previously it was only crimped at the bottom), allowing the brake line protection to better withstand the continuous stresses it is subjected to.

– Graphics: the Model Year 24 does a U-turn on the simple, essential look which marked the previous bike. The completely new graphics have an aggressive, geometric, and modern look, achieved thanks to skilful use of the classic red, white, and black colours typical of this model, integrating perfectly with frame and fairings in the characteristic Beta red.